Mold Remediation in Spicewood, TX
Mold is what water leaves behind when it sits, and the Texas heat makes it fast. Our local crews contain it, remove it, verify the result, and fix the moisture source that fed it.
(737) 530-9201Tap to call our 24/7 dispatch line
Mold is never the first problem, it is the aftermath of water that sat too long, and in the hot, humid Central Texas climate it can take hold within a day or two. A slow slab leak, a roof drip, or an AC overflow that went unnoticed feeds it behind the drywall until the musty smell or the dark patch gives it away. Texas Dry Home contains it, removes it, verifies the result, and, just as important, finds and fixes the moisture that fed it so it does not come back.
How we handle mold remediation in Spicewood
Call and dispatch
A real person answers 24/7 and the nearest Spicewood crew rolls with pumps, air movers, and moisture meters.
On-site assessment
We find the source and the full reach of the water, including what soaked into the slab, subfloor, and wall cavities.
Extract and dry
We pull the standing water, then run air movers and dehumidifiers to a verified dry standard, not just the surface.
Verify and bill
We log moisture readings until the structure is dry, then document the loss and bill your carrier directly.
Why mold takes hold fast in Central Texas
The climate here is built for mold, and hidden water gives it what it needs:
- Long, humid summers keep indoor humidity high, especially in closed rooms and attics
- Hidden moisture from a slab leak, a roof leak, or an AC overflow feeds it out of sight
- Porous materials like drywall, insulation, and wood give it a foothold within 24 to 48 hours
- Foundation and slab seepage keeps a wall damp long enough for growth to start
The EPA and the CDC both point to controlling moisture as the only lasting way to control mold, which is why we treat the water source, not just the stain.
Our mold remediation in Spicewood
We start by finding the moisture source and the full extent of the growth with meters and inspection. Then we set containment with plastic sheeting and negative air pressure so spores are not spread through the house while we work, and we run HEPA air scrubbers throughout. We remove the materials that cannot be saved, clean and treat the surfaces that can, and HEPA-vacuum the area. Finally we dry the structure to a verified reading so the conditions that grew the mold are gone, following the same standard our structural drying crews use.
Smell something musty or see a dark patch after a leak? Call and we schedule an assessment, then contain and remove it the right way.
☎ Call (737) 530-9201Do not just bleach it and paint over
Spraying bleach on surface mold and painting over it leaves the roots and the moisture behind, so it comes right back, and disturbing it without containment spreads spores through the house. Finding the water source and removing the growth under containment is what actually stops it.
Mold is the aftermath, so we fix the water
Remediation that ignores the source is temporary. Every mold job we do includes finding why the area was wet, whether that is a hidden leak, seepage, or a humidity problem, and correcting it or coordinating the repair. If the water is still active, we handle that loss first, then the mold, so the area goes back together dry and stays that way.
Health, safety, and a clean result
Mold can affect breathing and allergies, especially for children, older adults, and anyone sensitive, so we work under containment with proper protective gear and leave the area clean and dry, not just painted. For a larger or health-sensitive job we can coordinate independent testing so you have third-party confirmation the area is clear.
"A leak we did not know about left mold behind the guest room wall, and you could smell it. They contained the room, removed the affected drywall, found and fixed the moisture, and dried it out. No more smell, and they showed me it was actually dry before closing it up."
Vincent O. · Windermere Oaks, Spicewood · August 2026
Why the Lake Travis Hill Country calls us first
On-site in 45 to 75 minutes
A person answers 24/7 and the nearest crew rolls the moment you call, day or night, across the Lake Travis Hill Country.
IICRC-certified crews
Trained technicians with pumps, air movers, and moisture meters who dry to a verified standard, not a mop and a box fan.
We bill your insurer
We document the loss with photos and readings and work with your carrier directly, so the paperwork is not on you.
Deep local knowledge
Flash floods, slab leaks, clay seepage, wells, and attic AC. We know how water moves on Hill Country limestone.
From Spicewood to Marble Falls and across the Lake Travis Hill Country
Seated in Spicewood on State Highway 71, we respond across the west Austin Hill Country, day or night.
Seated in Spicewood on State Highway 71, our crews cover the whole Lake Travis Hill Country, day or night, and reach most homes in 45 to 75 minutes.
We serve Spicewood, Bee Cave, Lakeway, Steiner Ranch, Marble Falls, Horseshoe Bay, Lago Vista, Dripping Springs, and Leander.
See every town and ZIP we serve ›Related restoration services
Spicewood water damage questions, answered
How fast does mold grow after a leak?
In the Central Texas heat and humidity, mold can start on wet drywall, insulation, or wood within 24 to 48 hours. That is why drying a water loss quickly and completely is the best prevention, and why a leak that sat for a few days often needs remediation.
Can I just clean the mold myself with bleach?
For a small surface spot on a hard surface, maybe, but bleaching and painting over mold on drywall leaves the roots and the moisture behind, so it returns, and disturbing it without containment spreads spores. A real remediation finds the water source and removes the growth under containment.
Do you find what caused the mold?
Yes, and it is the most important step. Every job includes locating the moisture source, whether a hidden leak, foundation seepage, or a humidity problem, and correcting it or coordinating the repair. Remediation that ignores the source is only temporary.
Is the mold going to spread through my house while you work?
Not if it is contained. We seal the work area with plastic sheeting and negative air pressure and run HEPA air scrubbers so spores are captured rather than spread. That containment is a big part of why professional remediation works where a DIY attempt often makes it worse.
Do you do mold testing?
We assess the moisture and the extent of the growth as part of remediation, and for a larger or health-sensitive job we can coordinate independent third-party testing so you have outside confirmation the area is clear once we are done.
Is mold covered by insurance?
Coverage depends on the cause. Mold that follows a sudden covered water loss is often covered up to a policy limit, while mold from a long-neglected leak or humidity is frequently excluded. We document the source and the work and tell you honestly what is likely covered.
A local Spicewood crew is standing by
Water sitting means damage spreading. Call Texas Dry Home and a local crew is on the way, 45 to 75 minutes out across the Lake Travis Hill Country.
(737) 530-9201Call now, a local crew picks up day or night